CURRENT AWARDEES
AMERICAS
University of California, Davis (USA)
Masakazu SOSHI
"The advanced equipment is essential for the cutting-edge research at our laboratory."
>>Research / Education Activity Introduction
University of North Carolina at Charlotte (USA)
Gert GOCH
"Students will experience real-world manufacturing processes"
>> Research / Education Activity Introduction
University of Wisconsin-Madison (USA)
Frank PFEFFERKORN
ASIA
Kanazawa University (Japan)
Akira HOSOKAWA
"Our research and education are greatly supported by MTTRF"
>> Research / Education Activity Introduction
Kobe University (Japan)
Keiichi SHIRASE
"students are able to learn real-world machining operation"
>> Research / Education Activity Introduction
Osaka Institute of Technology (Japan)
Yukitoshi IHARA
"The latest machine ... is placed where it touches every student's eyes."
>> Research / Education Activity Introduction
Toyohashi University of Technology (Japan)
Naoki UCHIYAMA
"MTTRF equipment also provides good experience for our students"
>> Research / Education Activity Introduction
EUROPE
ETH (Switzerland)
Konrad WEGENER
"MTTRF equipment enables ... research on cutting edge technology"
>> Research / Education Activity Introduction
Katholieke Universiteit Leuven (Belgium)
Bert LAUWERS
"MTTRF is supporting us with the loan of modern machine tools, used in education and research"
>> Research / Education Activity Introduction
TU Wien (Austria)
Friedrich BLEICHER
"ensures that the principle of research-oriented teaching remain high-quality and sustainable"
>> Research / Education Activity Introduction
University of Firenze (Italy)
Gianni CAMPATELLI
"Our lab’s research potential has greatly increased"
>> Research / Education Activity Introduction
University College Dublin (Ireland)
Gerald BYRNE
"enabled us to set up a 'learning factory' for education and research"
>> Research / Education Activity Introduction
RECENT PUBLICATIONS RELATED TO MTTRF
Selected publications of 2015-2016, utlizing MTTRF equipment.
2016
Wegener, K., Weikert, S., Mayr, J., 2016, Age of Compensation - Challenge and Chance for Machine Tool Industry. International Journal of Automation Technology, forthcoming in 2016.
Schmale, J., Fehrenbacher, A., Shrivastava, A., Dingler, C., Pfefferkorn, F.E., 2016, Calibration of Dynamic Tool-Workpiece Interface Temperature Measurement during Friction Stir Welding, Measurement, doi: 10.1016/j.measurement.2016.02.065
Raymond, N., Hill, S., Soshi, M., 2016, Characterization of surface polishing with spindle mounted abrasive disk-type filament tool for manufacturing of machine tool sliding guideways, The International Journal of Advanced Manufacturing Technology,1–14, Doi: 10.1007/s00170-015-8283-8.
Hasegawa, T., Sato, R., Shirase, K., 2016, Cutting Force Simulation Referring Workpiece Voxel Model for End-milling Operation and Adaptive Control Based on Predicted Cutting Force, Journal of the Japan Society for Precision Engineering, Vol.82, No.5, pp.467-472. (available only in Japanese)
Campatelli, G., Scippa, A., 2016, Development of an artificial vision system for the automatic evaluation of the cutting angles of worn tools, Advances in Mechanical Engineering, 8, 3, 1-11.
Shrivastava, A., Zinn, M., Duffie, N.A., Ferrier, N.J., Smith, C.B., Pfefferkorn, F.E., 2016, Force Measurement based Discontinuity Detection during Friction Stir Welding, Proceedings of the 11th International Friction Stir Welding Symposium, May 17-20, Cambridge, UK.
Shrivastava, A., Zinn, M., Duffie, N.A., Ferrier, N.J., Smith, C.B., Pfefferkorn, F.E., 2016, Force Measurement based Discontinuity Detection during Friction Stir Welding, Proceedings of the 44th North American Manufacturing Research Conference, June 27 – July 1, Blacksburg, VA, USA.
Byrne, G., Ahearne, E., Cotterell, M., Mullany, B., O’Donnell, G., Sammler, F., 2016, High Performance Cutting in the New Era of Digital Manufacturing – A Roadmap, Procedia CIRP, Submitted for Publication in 2016
Hosokawa, A., Hirose, N., Ueda, T., Koyano, T., Furumoto, T., 2016, High-quality End Milling of CFRP -Inclination milling with high helix end mill-, International Journal of Automation Technology, Vol. 10, No.6, forthcoming in 2016.
Montevecchi, F., Grossi, N., Scippa, A., Campatelli, G., 2016, Improved RCSA technique for efficient tool-tip dynamics prediction, Precision Engineering, 44, 152-162.
Ihara, Y., Hamabata, N., 2016, Interpolation Motion Accuracy Measurement by Using R-test and Rotary Table, Spring conference of Japan Society for Precision Engineering, March, 749-750.
Baron, S., Ahearne, E., 2016, An Investigation of Force Components in Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F1537), Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Submitted for Publication in 2016.
Dowling, D. P., Ahearne, E., 2016, Learning Factories: a New Approach to Training in Advanced Manufacturing”, Engineer’s Journal, 23/02 (http://www.engineersjournal.ie/2016/02/23/learning-factories-a-new-approach-to-training-in-advanced-manufacturing/).
Grossi, N., Scippa, A., Montevecchi, F., Campatelli, G., 2016, Novel experimental-numerical approach to modeling machine tool dynamics for chatter stability prediction, Journal of Advanced Mechanical Design Systems and Manufacturing, 10, 2.
Kianmajd, B., Carter, D., Soshi, M., 2016, A novel toolpath force prediction algorithm using CAM volumetric data for optimizing robotic arthroplasty, International Journal of Computer Assisted Radiology and Surgery,1–10, Doi: 10.1007/s11548-016-1355-x.
Shrivastava, A., Zinn, M., Duffie, N.A., Ferrier, N.J., Smith, C.B., Pfefferkorn, F.E., 2016, On the Formation of Cavity Once Per Revolution during Friction Stir Welding, International Journal of Mechatronics and Manufacturing Systems, Under Revision.
Ahearne, E., Baron, S., O’Neill, E., O’Connell, C., 2016, Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F75), CIRP Journal of Manufacturing Science and Technology, Submitted for publication in 2016.
McParland, D., Baron, S., O’Rourke, S., Dowling, D., Ahearne, E., Parnell, A., 2016, Prediction of Tool-wear in Turning of Medical Grade Cobalt Chromium Molybdenum Alloy (ASTM F75) using Data Analytics, Journal of Intelligent Manufacturing, Submitted for publication in 2016.
Bleicher, F., Pollak, C., Brier, J., Siller, A., 2016, Reduction of built‐up edge formation in machining Al‐ and cast iron hybrid components by internal cooling of cutting inserts, CIRP Annals.
Bleicher, F., Brier, J., Siller, A., 2016, Simultaneous machining of a material combination with an internally and externally cooled cutting insert, Procedia CIRP 46.
Nakai, T., Ihara, Y., 2016, Study of S-shape cutting test on 5-axis machining center, Graduation research symposium of JSPE, March 15.
Raymond, N., Soshi, M., 2016, A Study on the Effect of Abrasive Filament Tool on Performance of Sliding Guideways for Machine Tools, Procedia CIRP, 45, 223–6, Doi: http://dx.doi.org/10.1016/j.procir.2016.02.169.
Odum, K., Soshi, M., 2016, Surface Formation Study Using a 3-D Explicit Finite Element Model of Machining of Gray Cast Iron, Procedia CIRP, 45, 111–114, Doi: http://dx.doi.org/10.1016/j.procir.2016.02.168.
Raymond, N., Soshi, M., 2016, Surface Polishing of Hardened Grey Cast Iron with a Compliant Abrasive Filament Tool, Procedia CIRP, 46, 205–8, Doi: 10.1016/j.procir.2016.03.193.
Takagi, K., Tsuji, K., Ihara, Y., 2016, Surface property by turn-milling process, Graduation research symposium of JSPE, March 15.
Bhinge, R., Park, J., Law, K. H., Dornfeld, D., Moneer, M., Rachuri, S., 2016, Towards a generalized energy prediction model for machine tools, Journal of Manufacturing Science and Engineering.
Kesriklioglu, S., Morrow, J.D., Pfefferkorn, F.E., 2016, Towards Sputtering Thin-Film Thermocouples on Tungsten Carbide Inserts to Measure Tool-Chip Interface Temperature, Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, June 27 – July 1, Blacksburg, VA, USA.
2015
Grossi, N., Montevecchi, F., Scippa, A., Campatelli, G., 2015, 3D Finite Element Modeling of Holder-Tool Assembly for Stability Prediction in Milling, Procedia CIRP, 31, 527-532.
Uchiyama, N., Goto, K. Sano, S., 2015, Analysis of Energy Consumption in Fundamental Motion of Industrial Machines and Experimental Verification, American Control Conference (ACC), Chicago, USA, July 1-3, 2179-2184.
Alessandro, V., Gianni, C., Antonio, S., 2015, Axis geometrical errors analysis through a performance test to evaluate kinematic error in a five axis tilting-rotary table machine tool, Precision Engineering, 39, 224-233
Shirase K., 2015, CAM-CNC integration for innovative intelligent machine tool, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21 Century (LEM21).
Baron, S., Ahearne, E., 2015, Characterization of Chip Morphology in Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ATM F1537), Proceedings of the 32nd International Manufacturing Conference, Belfast, Ireland, September 3-4.
Campatelli, G., Sallese, L., Scippa, A., 2015, Design of An Active Workpiece Holder, Procedia CIRP, 34, 217-222.
Rafanelli, F., Campatelli, G., Scippa, A., 2015, Development of chatter indices based on machining sound analysis, 22nd International Congress on Sound and Vibration (ICSV).
Dhokia, V., Zhang, X., Nassehi, A., Newman, S., T., Negre, J., Plakhotnik, D., Lauwers, B., 2015, Development of a data model and a prototype information sharing platform for DEMAT machine tools, International Journal of Computer Integrated Manufacturing, DOI: 10.1080/0951192X.2014.947327.
Rafanelli, F., Campatelli, G., Scippa, A., 2015, Effects of cutting conditions on forces and force coefficients in plunge milling operations, Advances in Mechanical Engineering, 7, 6, 1-9.
Montevecchi, F., Grossi, N., Scippa, A., Campatelli, G., 2015, Efficient receptance coupling approach for tool-tip dynamics identification. Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM 21).
Hayashi, A., Kashiwagi, H., Sato, R., Shirase, K., 2015, Energy Consumption of Drive System in NC Machine Tools During Peripheral Milling Operation, Journal of the Japan Society for Precision Engineering, Vol.81, No.5, pp.429-434. (available only in Japanese)
Park, J., Bhinge, R., Biswas, N., Srinivasan, A., Moneer, M., Rachuri, S., Dornfeld, D., Law, K. H., 2015, A generalized data-driven energy prediction model with uncertainty for a milling machine tool using Gaussian Process, ASME Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, NC, USA, July 8-12.
Scippa, A., Sallese, L., Grossi, N., Campatelli, G., 2015, Improved dynamic compensation for accurate cutting force measurements in milling applications, Mechanical Systems and Signal Processing, 54, 314-324.
Thoma, S., Haas, T., Nguyên, H., Weikert, S., Wegener, K., 2015, In- and Cross-Talk Evaluation of Different Machine Concepts, 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, Huddersfield, UK, ISBN 978-0-9566790-5-5, 160-169.
Hasegawa, S., Sato, R., Shirase, K., 2015, Influences of geometric and dynamic synchronous errors onto machined surface in 5-axis machining center, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21 Century (LEM21).
Bleicher, F., Steininger, A., 2015, Influencing the process stability for tapping through and blind holes by taps with radial lubricant supply, Proceedings of the 38th International MATADOR Conference on Advanced Manufacturing, Yunlin, Taiwan, March 28-31, 128-131.
Baron, S., Ahearne, E., 2015, An Investigation of Force Components in Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F1537), Proceedings of the 15th Computer-Aided Production Engineering (CAPE15) Conference, Edinburgh, Scotland, November 3-4.
Steininger, A., Siller, A., Bleicher, F., 2015, Investigations regarding process stability aspects in thread tapping Al-Si alloys; 25th DAAAM International Symposium on Intelligent Manufacturing & Automation, Elsevier, ISSN: 1877-7058, 1124-1132.
Shinoki, Y., Isnaini, M., Sato, R., Shirase, K., 2015, Machining operation planning system which utilize past machining operation data to generate new NC program, Transaction of the Japan Society of Mechanical Engineers, Vol.81, No.832, 15-00280. (available only in Japanese)
Ihara, Y., Hamabata, N., 2015, Motion Accuracy Measurement of 5-axis Machining Center by Using Non-contact Type R-test Device, Fall conference of Japan Society for Precision Engineering, September, 573-574.
Vanhove, H., Duflou, J., R., 2015, Negative Bulge Formation in High Speed Incremental Forming, Key Engineering Materials, Vol 639, pp. 173-178, DOI: 10.4028/www.scientific.net/KEM.639.173.
Guo, Y., Duflou, J.R., Qian, J., Tang, H., Lauwers, B., 2015, An operation-mode based simulation approach to enhance the energy conservation of machine tools, The Journal for Cleaner Production 101, 348-359.
Oda, M., Uchiyama, N., Sano, S., 2015, Optimal Trajectory Generation for Energy Saving in Machine Tool Contouring Motion and Experimental Verification, 2015, IEEE/SICE International Symposium on System Integration (SII), Nagoya, Japan, December 11-13, 121-126.
Campatelli, G., Scippa, A., Lorenzini, L., Sato, R., 2015, Optimal workpiece orientation to reduce the energy consumption of a milling process, International Journal of Precision Engineering and Manufacturing-Green Technology, 2, 1, 5-13.
Shrivastava, A., Dingler, C., Zinn, M., Pfefferkorn, F.E., 2015, Physics-Based Interpretation of Tool-Workpiece Interface Temperature Signals for Detection of Void Formation during Friction Stir Welding, SME Manufacturing Letters, Vol.5, 7-11.
Park, J., Bhinge, R., Law, K. H., Dornfeld, D., Mason, C., Rachuri, S., 2015, Real-time energy prediction for a milling machine tool using sparse Gaussian process regression, 2015 International Conference on Big Data, Santa Clara, CA, USA, October 29-November 1.
Mayr, J., Weikert, S., Wegener, K., Egeter, M., 2015, Shop floor conditions versus precision on 5- axis machine tools, 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, Huddersfield, UK, ISBN 978-0-9566790-5-5, 299-308.
Grossi, N., Sallese, L., Scippa, A., Campatelli, G., 2015, Speed-varying cutting force coefficient identification in milling, Precision Engineering, 42, 321-334.
Grossi, N., Scippa, A., Sallese, L., Sato, R., Campatelli, G., 2015, Spindle speed ramp-up test: A novel experimental approach for chatter stability detection, International Journal of Machine Tools and Manufacture, 89, 221-230.
Hamabata N., Ihara, Y., 2015, Study on the interpolation motion accuracy of multi-tasking machine tools using R-test, Annual conference of Japan Society of Mechanical Engineering, September, S1310203.
Hamabata, N., Ihara, Y., 2015, Study on the interpolation motion accuracy of multi-tasking tools using R-test, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21 Century (LEM21), Kyoto, Japan, October 20.
Mayr, J., Egeter, M., Weikert, S., Wegener, K., 2015, Thermal error compensation of Rotary axes and main spindles using cooling power as Input Parameter, Journal of Manufacturing Systems 37, 542-549.
Scippa, A., Montevecchi, F., Grossi, N., Sallese, L., Campatelli, G., 2015, Time domain simulation model for active fixturing in milling. Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM 21).